Research Activity 1

Name of Faculty: Gaurav Goswami

No of Students Involved: 5

DESIGN OF 1 kW CAPACITY SOLAR ROOF TOP SYSTEM

The exhaustion of conventional resources and its effect on climate requires an urgent call for the substitute power resources to invite up the current power requirement. Solar energy is an endless, unsoiled and prospective energy source among all other non conventional energy options. As more concentration is being done on focal point for the development of renewable energy capital globally. To detect their feasibility it is necessary to do the economic and technical assessment of the resources. In the recent era of electrical system development, the solar PV plays an important role in the energy conservation. This paper describes a complete analysis of 1 KW solar rooftop system. For this purpose we have installed 1KW solar rooftop system by considering the load forecasting, electrical design parameters, fabrication of structure by considering mechanical parameters and environmental consideration.

OBJECTIVES

1. To study solar roof of system including equipment and system specification that is solar panel, charge controller and batteries.
2. The main aim of our project is to track on the maximum solar energy without solar radiation loss for the efficient use of solar energy

CONCLUSION

A 1KW PV system is studied for small homes only for rustic areas sited in India. Performance of the system  and cost analysis. The energy produced by the PV system is also calculated hourly wise. Also the effect of global radiation on the generation of solar energy is depicted. In this project it is necessary to obtain the analyzation and properly estimation of the system with including measurement of the various parameters such as power, output voltage, current, solar radiation.

Based on Research Work Project was designed

The suggestions/ Review / feedback can be sent on gauravgoswami8@gmail.com

 

 

 

Research Activity 2

Name of Faculty: Prashant Bhatt

No of Students Involved:

Design And Analysis Of  Solar PV System Models

Solar Rooftop PV systems are becoming more popular these days as it is proven to lower electricity bills and potential contributory to lessen CO2 emissions. Three models of 1.215 kWp solar rooftop PV systems, namely: on-grid, off-grid and hybrid were designed and installed at Room EB217 of the College of Engineering building, Tarlac State University, Romulo Boulevard San Vicente, Tarlac City in order to determine their individual characteristics in terms of (1) design analysis and wiring diagram; (2) solar PV System components and total cost of installations; (3) amount of savings incurred in the solar generation and (4) rate of return and recovery period. The result showed that for the same amount of solar panel capacity, the on-grid model has the simplest design and wiring diagram as compared to the off-grid and hybrid models. Also, the on-grid model has the least number of components and no battery and thereby it is the most economical model to install since it is 58% cheaper than the two other models. In terms of actual amount of savings incurred in the solar generation, the hybrid model offers the highest savings of P2,798.40 per month, followed by the on-grid model at P2,126.40 per month while the off-grid model had the lowest monthly savings of P1,017.60 per month. Among the three models, the on-grid offers the highest ROR on investment at 2.72% per month and the shortest period of recovery of 3 years. The hybrid had an ROR of 2.08% per month and a recovery period of 4 years while the off grid had the lowest ROR of 0.75% per month and the longest recovery period of 11 years. It is concluded that the on-grid model offers the most feasible and viable alternative in solar rooftop PV system design and installations.

RESEARCH METHOD

The project used Research and Development Method which is focused on electrical design and installation, observation and comparison of the three solar PV models. The following steps summarized the procedure of the project:

1. Conduct design analysis for three 1 kW solar PV system models. In this step, electrical circuit diagrams with design computations were prepared and drawn to serve as wiring guide for installers. In the design computation, proper size of wires and overcurrent circuit protections both for the DC and AC side were determined and specified. Also, the proper ratings of inverters and solar charge controller, battery connections and other components were identified and specified.
2. Prepare bill of materials and cost estimates based on the design analysis.
3. Assemble and install the materials for each model. Once the items were completed, the installations commenced upon approval of proper authorities.
4. . Perform testing and commissioning. Testing and commissioning were done to ascertain the functionality of the assembled models.
5. Report Writing.

CONCLUSION

Three models of solar PV systems of the same input capacity of 1,215 Watts each were compared and presented in this paper. The three models differ with each other in terms of wiring design, system components, initial costs, actual monthly savings, rate of return and period of recovery. With these parameters, it is concluded that the on-grid model offers the most feasible and viable alternative in solar rooftop PV system design and installations.

Based on Research Work Project was designed

The suggestions/ Review / feedback can be sent on prashantindore11@gmail.com

 

 

 

Research Activity 3

Name of Faculty:  Dr. Uzma Qureshi

No of Students Involved: 10

Design of an Electric Cart with Batteries & Solar Panel for 6 Seat Capacity

In this paper, the Design & Calculations of an Electric golf cart is done the calculations and process to develop a golf cart chassis, electrical transmission using transaxle, braking, steering geometry, suspension system, solar panel of a long six seat golf cart, battery calculations and controller which monitors the electric system is explained. All the materials used for the calculation are industry standard being utilized currently. Priority of this design was to keep the cart as light weight as possible and rigid with good performance on grassy and concrete terrain’s used in either golf course or in hospitality / education sectors. A unique tubular chassis is used in the design comprising of circular & rectangular shape. The focus of design was long mileage from the batteries used and how much, adding solar panels can contribute to the existing range of the electric vehicle. A 23 miles range from the battery pack using 6 deep cycle lead acid batteries was achieved and increased 12 miles from the solar panels under the constraint assumed for its use (direct sunlight for over 6-7 hours)

DESIGN DEVELOPMENT

The design development stage is where the design considerations are outlined and according to which under certain parameters, criteria and market research the following design is developed.

1. The design considerations set are so the vehicle can meet all safety standards & ergonomics and performance during its entire life cycle
2. The design development stages are divided in many steps they are;
3. Chassis
4. Transmission
5. Brake
6. Steering
7. Suspension
8. Battery
9. Solar panel

CONCLUSION

1. A lot of market research went into the design of the electric cart and desirable results were achieved.
2. Finalizing the design of the chassis and trying to innovate with different pipe sizes and shapes gave a unique looking cart with considerable strength and balance.
3. The performance of overall vehicle including its speed, braking distance and turning radius were achieved under the pre-set assumed values.
4. The suspension design was selected carefully to give the best performance in overloading conditions as well and the leaf spring to provide more support in case of heavy luggage/materials kept behind.
5. The batteries being heavy and placed below the seats makes the majority of the weight carried by the cart at low height even after passenger is seated which gives the entire cart a very low roll center which reduces the chance of cart rolling during uneven terrains

Based on Research Work Project was designed

The suggestions/ Review / feedback can be sent on uzmarose162@gmail.com

 

 

Research Activity 4

Name of Faculty: Dr. Anoop  Kumar Pathariya

No of Students Involved: 5

Fabrication of Solar Outdoor Air Purifier

This research paper is about designing and fabricating an air purifier system which is powered by solar energy and testing the effectiveness of the system to curb the air pollution. The focus is on extracting the suspended particulate matter from the air which are the major contributors in the pollution of air in many urban cities. It works on a nonconventional method and intents to achieve best possible air purification results using eco-friendly and economical method. It works on the basic principle of adhesion of the suspended particles in the air with the liquid and settles down due to being heavier than air and gets separated from the air helping us to achieve better air quality index. The fans and the pump in system are operated with the help of solar energy, produced by solar panels, which converts the solar radiations into electricity.

Working

There is a chamber in which air is sucked in by the fan, while the air is entering it passed through strainer.

Simultaneously water is pumped from reservoir to the atomizer, which converts water into small water droplets and these droplets are suspended into the chamber along with air.

These water droplets have adhesive property due to which the particulate matter and dust particles get absorbed on them.

This way air is cleaned and is flown out from chamber by exhaust fan.

The water with dust and particulate matter is collected in evaporation tank, where water under goes natural evaporation process, leaving behind the dust and particulate matter these are periodically cleaned and water is used again in air cleaning process.

Conclusion

Now we have seen that how efficient is SOLAR POWERED AIR PURIFIER than other type of device available in market. It also very economical and do not have to replace any component quickly. It reduces particulate level to satisfactory position where a person does not need to worry about pollution related problems.

A pure and clean air is right of a human being and all other living creatures on this earth and this project is a small effort from our side to give the all their right.

Also in future, modifications can be made to improve working efficiency without effecting setup.

Based on Research Work Project was designed

The suggestions/ Review / feedback can be sent on anoopphd@gmail.com